ICT Co.,Ltd. Original Product Micro-Probe

Home > Board Test Fixture > Micro-Probe

Micro-probe

Special Features

1.The probe is socket-less.

It is thicker than standard probe.
The probe tip does not shake and its accuracy and pin contact reliability is greater.
The center tip can be replaced or changed.

2.The moving part is on the wiring side.

It is durable and strong against contamination/flux.
It can be recycled.

Micro Probe is designned to be inserted to a hole of 2 plates of 2.4mm thick built-up.After MicroProbes are inserted,a board for wiring is fixed.

Fixture Movement
probe_mov

Micro Probe Specifications
*We do not accept direct order from overseas. We do not sell only Micro-Probe to customers.

	MTP020	MTP030	MTP040	MTP050	MTP075
Pre-load force (g) (Standard, High)	10	10	20	40	70
2/3 travel force (g)	30	30	50	120	160
Full Stroke (mm)	3.5	3.5	5	5	5
Diameter (mm)	0.38	0.48	0.65	0.9	1.3
Min pitch (mm)	0.55	0.7	0.9	1.2	1.7
Drill size (mm)	0.42	0.52	0.68	0.95	1.35
Minimum pad (mm)	0.35	0.4	0.4	0.65	0.65
Material	beryllium / steel

Parts Number

		20mil	30mil	40mil	50mil	75mil
3-Sided Chisel	03	-	MTP-030S-03 (30.0mm)	MTP-040S-03 (30.5mm)	MTP-050SHT-03 (30.5mm)	MTP-075EXH-03 (30.5mm)
4-Point Serrated	04	MTP-020S-04 (29.5mm)	MTP-030S-04 (30.0mm)	MTP-040S-04 (30.5mm)	MTP-050SHT-04S (30.5mm)	-
5-Point Serrated	05	-	-	-	-	MTP-075EXH-05 (29.0mm)
9-Point Serrated	09	-	-	-	MTP-050SHT-09 (29.0mm)	-
3-Side Chisel (Sharp)	13	-	-	-	MTP-050SHT-13S (30.5mm)	MTP-075EXH-13S (30.5mm)
Reduced Standard Crown	14	MTP-020S-14 (29.5mm)	-	-	MTP-050SHT-14 (29.0mm)	MTP-075EXH-14 (29.0mm)
5-Point Serrated	15	-	-	-	-	MTP-075EXH-15 (30.0mm)

※「■」Production stoppage. (It is correspondence of the stock limit.)
※※When the end of the parts number is "S", the material is steel. Otherwise, it is beryllium.